How to install and fix the spring balancer?

Select the installation location: First determine the installation location of the spring balancer. Choose a stable support structure, such as ceiling beams or wall beams, to ensure a stable and secure installation.

https://www.jtlehoist.com/

Check Work Load: Determine the weight of the tool or equipment you want to support and balance with a spring balancer. Select the appropriate spring balancer model based on the weight range of the working load.

https://www.jtlehoist.com/

Install the spring balancer: Fix the fixed end of the spring balancer to the supporting structure, usually using bolts, screws or steel cables. Make sure the fixed end is secure and can bear the weight of the working load.

Attach Tool or Equipment: Attach the hanging end of the tool or equipment to the spring balancer's hanging assembly. This is usually accomplished by connecting hooks, loops or clamps. Make sure the connection is secure to prevent the tool or device from accidentally falling off.

https://www.jtlehoist.com/

Adjust Tension: Adjust the tension of the spring balancer based on the weight of the tool or equipment and the desired balancing effect. Some spring balancers have an adjustment mechanism that can be manually or electrically adjusted. According to the manufacturer's guidance, gradually adjust the tension until the desired balance is achieved.


Post time: Nov-17-2023